Stage Summaries
At the end of each stage of the plan AvPlan generates a Summary detailing EET, ETA for the end of the stage (if an ETD has been entered), Fuel burn for the stage, and the planned distance to be flown for the stage.
At the end of the final stage of a multi-stage plan, AvPlan also provides the total EET, distance and fuel burn.
Note that the Fuel burn values are just that- planned fuel burn. They do not reflect the required fuel quantity. That is detailed in the Weight and Balanced and Fuel planning page.
If hourly cost figures and or fuel cost figures have been provided for the aircraft, then the notional cost of the flight will also be shown.
Adding a new stage
To add a new stage at the end of the current stage (i.e. to land at the destination than take off again and go somewhere else), simply tap on the New Stage button.
Removing a stage by overflying a point
To remove a landing point and thereby join two stages together into a single stage, tap the Overfly button
Need more help with this?
Help Centre (Tap and hold to open the Link)